Alkaline earth metal
|Alkaline earth metals|
The alkaline earth metals are a group of chemical elements in the periodic table with very similar properties. They are all shiny, silvery-white, somewhat reactive metals at standard temperature and pressure and readily lose their two outermost electrons to form cations with charge 2+ and an oxidation state, or oxidation number of +2. In the modern IUPAC nomenclature, the alkaline earth metals comprise the group 2 elements.[n 1]
The alkaline earth metals are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra). This group lies in the s-block of the periodic table as all alkaline earth metals have their outermost electron in an s-orbital.
All the discovered alkaline earth metals occur in nature. Experiments have been conducted to attempt the synthesis of element 120, which is likely to be the next member of the group, but they have all met with failure. However, element 120 may not be an alkaline earth metal due to relativistic effects, which are predicted to have a large influence on the chemical properties of superheavy elements.
- Compounds and reactions 1.1.1
Physical and atomic 1.2
- Nuclear stability 1.2.1
- Chemical 1.1
- Etymology 2.1
- Beryllium 2.2.1
- Magnesium 2.2.2
- Calcium 2.2.3
- Strontium 2.2.4
- Barium 2.2.5
- Radium 2.2.6
- Occurrence 3
- Production 4
- Applications 5
- Biological role and precautions 6
- Extensions 7
- Notes 8
- References 9
- Bibliography 10
- Further reading 11
As with other groups, the members of this family show patterns in their electronic configuration, especially the outermost shells, resulting in trends in chemical behavior:
|Z||Element||No. of electrons/shell||Electron configuration[n 2]|
|4||beryllium||2, 2||[He] 2s2|
|12||magnesium||2, 8, 2||[Ne] 3s2|
|20||calcium||2, 8, 8, 2||[Ar] 4s2|
|38||strontium||2, 8, 18, 8, 2||[Kr] 5s2|
|56||barium||2, 8, 18, 18, 8, 2||[Xe] 6s2|
|88||radium||2, 8, 18, 32, 18, 8, 2||[Rn] 7s2|
Most of the chemistry has been observed only for the first five members of the group. The chemistry of radium is not well-established due to its radioactivity; thus, the presentation of its properties here is limited.
The alkaline earth metals are all silver-colored and soft, and have relatively low densities, melting points, and boiling points. In chemical terms, all of the alkaline metals react with the halogens to form the alkaline earth metal halides, all of which being ionic crystalline compounds (except for beryllium chloride, which is covalent). All the alkaline earth metals except beryllium also react with water to form strongly alkaline hydroxides and, thus, should be handled with great care. The heavier alkaline earth metals react more vigorously than the lighter ones. The alkaline metals have the second-lowest first ionization energies in their respective periods of the periodic table because of their somewhat low effective nuclear charges and the ability to attain a full outer shell configuration by losing just two electrons. The second ionization energy of all of the alkaline metals is also somewhat low.
Beryllium is an exception: It does not react with water or steam, and its halides are covalent. If beryllium did form compounds with an ionization state of +2, it would polarize electron clouds that are near it very strongly and would cause extensive orbital overlap, since beryllium has a high charge density. All compounds that include beryllium have a covalent bond. Even the compound beryllium fluoride, which is the most ionic beryllium compound, has a low melting point and a low electrical conductivity when melted.
All the alkaline earth metals have two electrons in their valence shell, so the energetically preferred state of achieving a filled electron shell is to lose two electrons to form doubly charged positive ions.
Compounds and reactions
The alkaline earth metals all react with the halogens to form ionic halides, such as calcium chloride (CaCl
2), as well as reacting with oxygen to form oxides such as strontium oxide (SrO). Calcium, strontium, and barium react with water to produce hydrogen gas and their respective hydroxides, and also undergo transmetalation reactions to exchange ligands.
Alkaline earth metals fluorides solubility-related constants[n 3] Metal
Be 2,455 458 3,371 3,526 soluble Mg 1,922 458 2,838 2,978 0.0012 Ca 1,577 458 2,493 2,651 0.0002 Sr 1,415 458 2,331 2,513 0.0008 Ba 1,361 458 2,277 2,373 0.006
Physical and atomic
The table below is a summary of the key physical and atomic properties of the alkaline earth metals.
|Alkaline earth metal||
Standard atomic weight
First ionization energy
|Flame test color|
|Radium||[n 5]||973||700||2010||1737||5.5||0.9||509.3||221||Crimson red[n 6]|
All of the alkaline earth metals except magnesium and strontium have at least one naturally occurring radioisotope: beryllium-7, beryllium-10, and calcium-41 are trace radioisotopes, calcium-48 and barium-130 have very long half-lives and, thus, occur naturally, and all isotopes of radium are radioactive. Calcium-48 is the lightest nuclide to undergo double beta decay.
The natural radioisotope of calcium, calcium-48, makes up about 0.1874% of natural calcium, and, thus, natural calcium is weakly radioactive. Barium-130 makes up approximately 0.1062% of natural barium, and, thus, barium is weakly radioactive, as well.
The alkaline earth metals are named after their oxides, the alkaline earths, whose old-fashioned names were beryllia, magnesia, lime, strontia, and baryta. These oxides are basic (alkaline) when combined with water. "Earth" is an old term applied by early chemists to nonmetallic substances that are insoluble in water and resistant to heating—properties shared by these oxides. The realization that these earths were not elements but compounds is attributed to the chemist Antoine Lavoisier. In his Traité Élémentaire de Chimie (Elements of Chemistry) of 1789 he called them salt-forming earth elements. Later, he suggested that the alkaline earths might be metal oxides, but admitted that this was mere conjecture. In 1808, acting on Lavoisier's idea, Humphry Davy became the first to obtain samples of the metals by electrolysis of their molten earths, thus supporting Lavoisier's hypothesis and causing the group to be named the alkaline earth metals.
The calcium compounds calcite and lime have been known and used since prehistoric times. The same is true for the beryllium compounds beryl and emerald. The other compounds of the alkaline earth metals were discovered starting in the early 15th century. The magnesium compound magnesium sulfate was first discovered in 1618 by a farmer at Epsom in England. Strontium carbonate was discovered in minerals in the Scottish village of Strontian in 1790. The last element is the least abundant: radioactive radium, which was extracted from uraninite in 1898.
All elements except beryllium were isolated by electrolysis of molten compounds. Magnesium, calcium, and strontium were first produced by Humphry Davy in 1808, whereas beryllium was independently isolated by Friedrich Wöhler and Antoine Bussy in 1828 by reacting beryllium compounds with potassium. In 1910, radium was isolated as a pure metal by Curie and André-Louis Debierne also by electrolysis.
Beryl, a mineral that contains beryllium, has been known since the time of the Ptolemaic dynasty in Egypt. Although it was originally thought that beryl was an aluminium silicate, beryl was later found to contain a then-unknown element when, in 1797, Louis-Nicolas Vauquelin dissolved aluminium hydroxide from beryl in an alkali. In 1828, Friedrich Wöhler and Antoine Bussy independently isolated this new element, beryllium, by the same method, which involved a reaction of beryllium chloride with metallic potassium; this reaction was not able to produce large ingots of beryllium. It was not until 1898, when Paul Lebeau performed an electrolysis of a mixture of beryllium fluoride and sodium fluoride, that large pure samples of beryllium were produced.
Magnesium was first produced by Sir Humphry Davy in England in 1808 using electrolysis of a mixture of magnesia and mercuric oxide. Antoine Bussy prepared it in coherent form in 1831. Davy’s first suggestion for a name was magnium, but the name magnesium is now used.
Lime has been used as a material for building since 7000 to 14,000 BCE, and kilns used for lime have been dated to 2,500 BCE in Khafaja, Mesopotamia. Calcium as a material has been known since at least the first century, as the ancient Romans were known to have used calcium oxide by preparing it from lime. Calcium sulfate has been known to be able to set broken bones since the tenth century. Calcium itself, however, was not isolated until 1808, when Humphry Davy, in England, used electrolysis on a mixture of lime and mercuric oxide, after hearing that Jöns Jakob Berzelius had prepared a calcium amalgam from the electrolysis of lime in mercury.
In 1790, physician Adair Crawford, who had been working with barium, realized that Strontian ores showed different properties than other supposed ores of barium. Therefore, he concluded that these ores contained new minerals, which were named strontites in 1793 by Thomas Charles Hope, a chemistry professor at the University of Glasgow, who confirmed Crawford's discovery. Strontium was eventually isolated in 1808 by Sir Humphry Davy by electrolysis of a mixture of strontium chloride and mercuric oxide. The discovery was announced by Davy on 30 June 1808 at a lecture to the Royal Society.
Barite, a mineral containing barium, was first recognized as containing a new element in 1774 by Carl Scheele, although he was able to isolate only barium oxide. Barium oxide was isolated again two years later by Johan Gottlieb Gahn. Later in the 18th century, William Withering noticed a heavy mineral in the Cumberland lead mines, which are now known to contain barium. Barium itself was finally isolated in 1808 when Sir Humphry Davy used electrolysis with molten salts, and Davy named the element barium, after baryta. Later, Robert Bunsen and Augustus Matthiessen isolated pure barium by electrolysis of a mixture of barium chloride and ammonium chloride.
While studying uraninite, on 21 December 1898, Marie and Pierre Curie discovered that, even after uranium had decayed, the material created was still radioactive. The material behaved somewhat similarly to barium compounds, although some properties, such as the color of the flame test and spectral lines, were much different. They announced the discovery of a new element on 26 December 1898 to the French Academy of Sciences. Radium was named in 1899 from the word radius, meaning ray, as radium emitted power in the form of rays.
Beryllium occurs in the earth's crust at a concentration of two to six parts per million (ppm), much of which is in soils, where it has a concentration of six ppm. Beryllium is one of the rarest elements in seawater, even rarer than elements such as scandium, with a concentration of 0.2 parts per trillion. However, in freshwater, beryllium is somewhat more common, with a concentration of 0.1 parts per billion.
Magnesium and calcium are very common in the earth's crust, with calcium the fifth-most-abundant element, and magnesium the eighth. None of the alkaline earth metals are found in their elemental state, but magnesium and calcium are found in many rocks and minerals: magnesium in carnellite, magnesite, and dolomite; and calcium in chalk, limestone, gypsum, and anhydrite.
Strontium is the fifteenth-most-abundant element in the Earth's crust. Most strontium is found in the minerals celestite and strontianite. Barium is slightly less common, much of it in the mineral barite.
Radium, being a decay product of uranium, is found in all uranium-bearing ores. Due to its relatively short half-life, radium from the Earth's early history has decayed, and present-day samples have all come from the much slower decay of uranium.
Most beryllium is extracted from beryllium hydroxide. One production method is sintering, done by mixing beryl, sodium fluorosilicate, and soda at high temperatures to form sodium fluoroberyllate, aluminium oxide, and silicon dioxide. A solution of sodium fluoroberyllate and sodium hydroxide in water is then used to form beryllium hydroxide by precipitation. Alternatively, in the melt method, powdered beryl is heated to high temperature, cooled with water, then heated again slightly in sulfuric acid, eventually yielding beryllium hydroxide. The beryllium hydroxide from either method then produces beryllium fluoride and beryllium chloride through a somewhat long process. Electrolysis or heating of these compounds can then produce beryllium.
To produce barium, barite ore is separated from quartz, sometimes by froth flotation methods, resulting in relatively pure barite. Carbon is then used to reduce the baryte into barium sulfide, which is dissolved with other elements to form other compounds, such as barium nitrate. These in turn are thermally decompressed into barium oxide, which eventually yields pure barium after a reaction with aluminium. The most important supplier of barium is China, which produces more than 50% of world supply.
Beryllium is used mostly for military applications, but there are other uses of beryllium, as well. In electronics, beryllium is used as a p-type dopant in some semiconductors, and beryllium oxide is used as a high-strength electrical insulator and heat conductor. Due to its light weight and other properties, beryllium is also used in mechanics when stiffness, light weight, and dimensional stability are required at wide temperature ranges.
Magnesium has many different uses. One of its most common uses was in industry, where it has many structural advantages over other materials such as aluminium, although this usage has fallen out of favor recently due to magnesium's flammability. Magnesium is also often alloyed with aluminium or zinc to form materials with more desirable properties than any pure metal. Magnesium has many other uses in industrial applications, such as having a role in the production of iron and steel, and the production of titanium.
Calcium also has many uses. One of its uses is as a reducing agent in the separation of other metals from ore, such as uranium. It is also used in the production of the alloys of many metals, such as aluminium and copper alloys, and is also used to deoxidize alloys as well. Calcium also has a role in the making of cheese, mortars, and cement.
Strontium and barium do not have as many applications as the lighter alkaline earth metals, but still have uses. Strontium carbonate is often used in the manufacturing of red fireworks, and pure strontium is used in the study of neurotransmitter release in neurons. Barium has some use in vacuum tubes to remove gases, and barium sulfate has many uses in the petroleum industry, as well as other industries.
Due to its radioactivity, radium no longer has many applications, but it used to have many. Radium used to be used often in luminous paints, although this use was stopped after workers got sick. As people used to think that radioactivity was a good thing, radium used to be added to drinking water, toothpaste, and many other products, although they are also not used anymore due to their health effects. Radium is no longer even used for its radioactive properties, as there are more powerful and safer emitters than radium.
Biological role and precautions
Magnesium and calcium are ubiquitous and essential to all known living organisms. They are involved in more than one role, with, for example, magnesium or calcium ion pumps playing a role in some cellular processes, magnesium functioning as the active center in some enzymes, and calcium salts taking a structural role, most notably in bones.
Strontium plays an important role in marine aquatic life, especially hard corals, which use strontium to build their exoskeletons. It and barium have some uses in medicine, for example "barium meals" in radiographic imaging, whilst strontium compounds are employed in some toothpastes. Excessive amounts of strontium-90 are toxic due to its radioactivity and strontium-90 mimics calcium and then can kill.
Beryllium and radium, however, are toxic. Beryllium's low aqueous solubility means it is rarely available to biological systems; it has no known role in living organisms and, when encountered by them, is usually highly toxic. Radium has a low availability and is highly radioactive, making it toxic to life.
The next alkaline earth metal after radium is thought to be element 120, although this may not be true due to relativistic effects. The synthesis of element 120 was first attempted in March 2007, when a team at the Flerov Laboratory of Nuclear Reactions in Dubna bombarded plutonium-244 with iron-58 ions; however, no atoms were produced, leading to a limit of 400 fb for the cross-section at the energy studied. In April 2007, a team at the GSI attempted to create element 120 by bombarding uranium-238 with nickel-64, although no atoms were detected, leading to a limit of 1.6 pb for the reaction. Synthesis was again attempted at higher sensitivities, although no atoms were detected. Other reactions have been tried, although all have been met with failure.
The chemistry of element 120 is predicted to be closer to that of calcium or strontium instead of barium or radium. This is unusual as periodic trends would predict element 120 to be more reactive than barium and radium. This lowered reactivity is due to the expected energies of element 120's valence electrons, increasing element 120's ionization energy and decreasing the metallic and ionic radii.
- In both the old IUPAC and the CAS systems for group numbering, this group is known as group IIA (pronounced as "group two A", as the "II" is a Roman numeral).
- Noble gas notation is used for conciseness; the nearest noble gas that precedes the element in question is written first, and then the electron configuration is continued from that point forward.
- Energies are given in −kJ/mol, solubilities in mol/L; HE means "hydration energy".
- The number given in parentheses refers to the measurement uncertainty. This uncertainty applies to the least significant figure(s) of the number prior to the parenthesized value (i.e., counting from rightmost digit to left). For instance, 1.00794(7) stands for 1.00794±0.00007, whereas 1.00794(72) stands for 1.00794±0.00072.
- The element does not have any stable nuclides, and a value in brackets indicates the mass number of the longest-lived isotope of the element.
- The color of the flame test of pure radium has never been observed; the crimson-red color is an extrapolation from the flame test color of its compounds.
- Fluck, E. (1988). "New Notations in the Periodic Table".
- RSC–IUPAC. ISBN 0-85404-438-8. pp. 51. Electronic version..
- "Periodic Table: Atomic Properties of the Elements". nist.gov.
- Lide, D. R., ed. (2003). CRC Handbook of Chemistry and Physics (84th ed.). Boca Raton, FL: CRC Press.
- "Abundance in Earth's Crust". WebElements.com. Retrieved 14 April 2007.
- Gäggeler, Heinz W. (5–7 November 2007). "Gas Phase Chemistry of Superheavy Elements". Lecture Course Texas A&M. Retrieved 26 February 2012.
- Jakubke, Hans-Dieter; Jeschkeit, Hans, eds. (1994). Concise Encyclopedia Chemistry. trans. rev. Eagleson, Mary. Berlin: Walter de Gruyter.
- Bell, N. A. (1972). "Beryllium halide and pseudohalides". In Emeléus, Harry Julius; Sharpe, A. G. Advances in inorganic chemistry and radiochemistry, Volume 14. New York: Academic Press. pp. 256–277.
- Walsh, Kenneth A. (2009-08-01). Beryllium chemistry and processing. ASM International. pp. 99–102, 118–119.
- Hertz, Raymond K. (1987). "General analytical chemistry of beryllium". In Coyle, Francis T. Chemical analysis of metals: a symposium. ASTM. pp. 74–75.
- Wiberg, Wiberg & Holleman 2001, pp. XXXVI–XXXVII.
- Wiberg, Wiberg & Holleman 2001, p. XXXVI.
- Lide 2004, p. 12-23.
- Wiberg, Wiberg & Holleman 2001, p. 1073.
- "Standard Uncertainty and Relative Standard Uncertainty".
- Wieser, Michael E.; Berglund, Michael (2009). "Atomic weights of the elements 2007 (IUPAC Technical Report)".
- Wieser, Michael E.; Coplen, Tyler B. (2011). "Atomic weights of the elements 2009 (IUPAC Technical Report)".
- Slater, J. C. (1964). "Atomic Radii in Crystals".
- Jensen, William B. (2003). "The Place of Zinc, Cadmium, and Mercury in the Periodic Table". Journal of Chemical Education (
- Kirby, H. W; Salutsky, Murrell L (1964). The Radiochemistry of Radium. National Academies Press.
- G. Audi, A. H. Wapstra, C. Thibault, J. Blachot and O. Bersillon (2003). "The NUBASE evaluation of nuclear and decay properties".
- Richard B. Firestone (15 March 2010). "Isotopes of Calcium (Z=20)". Lawrence Berkeley National Laboratory. Retrieved 12 June 2012.
- Richard B. Firestone (15 March 2010). "Isotopes of Barium (Z=56)". Lawrence Berkeley National Laboratory. Retrieved 12 June 2012.
- Robert E. Krebs (2006). The history and use of our earth's chemical elements: a reference guide. Greenwood Publishing Group. pp. 65–81.
- Miller, M. Michael. "Commodity report:Lime". United States Geological Survey. Retrieved 2012-03-06.
- Weeks 1968, p. 535.
- Weeks 1968, p. 537.
- Vauquelin, Louis-Nicolas (1798). "De l'Aiguemarine, ou Béril; et découverie d'une terre nouvelle dans cette pierre". Annales de Chimie (26): 155–169.
- Bussy, Antoine (1828). "D'une travail qu'il a entrepris sur le glucinium". Journal de Chimie Medicale (4): 456–457.
- Weeks 1968, p. 539.
- Davy, H. (1808). "Electro-chemical researches on the decomposition of the earths; with observations on the metals obtained from the alkaline earths, and on the amalgam procured from ammonia". Philosophical Transactions of the Royal Society of London 98: 333–370.
- Williams, Richard (2004). Lime Kilns and Lime Burning. p. 4.
- Oates, J. A. H (2008-07-01). Lime and Limestone: Chemistry and Technology, Production and Uses.
- Davy H (1808). "Electro-chemical researches on the decomposition of the earths; with observations on the metals obtained from the alkaline earths, and on the amalgam procured from ammonia". Philosophical Transactions of the Royal Society of London 98: 333–370.
- Crawford, Adair (1790). "On the medicinal properties of the muriated barytes". Medical Communications (London) 2: 301–359.
- Murray, T. (1993). "Elemementary Scots: The Discovery of Strontium". Scottish Medical Journal 38 (6): 188–189.
- Davy, Humphry (1808). researches on the decomposition of the earths; with observations on the metals obtained from the alkaline earths, and on the amalgam procured from ammonia 98. Philosophical Transactions of the Royal Society of London. pp. 333–370.
- "Masthead". Annalen der Chemie und Pharmacie 93 (3): fmi–fmi. 1855.
- Wagner, Rud.; Neubauer, C.; Deville, H. Sainte-Claire; Sorel; Wagenmann, L.; Techniker; Girard, Aimé (1856). "Notizen". Journal für Praktische Chemie 67: 490–508.
- Curie, Pierre; Curie, Marie and Bémont, Gustave (1898). "Sur une nouvelle substance fortement radio-active, contenue dans la pechblende (On a new, strongly radioactive substance contained in pitchblende)". Comptes Rendus 127: 1215–1217. Retrieved 2009-08-01.
- "radium". Online Etymology Dictionary. Retrieved 20 August 2011.
- Merck contributors (2006). O'Neil, Marydale J.; Heckelman, Patricia E.; Roman, Cherie B., eds. The Merck Index: An Encyclopedia of Chemicals, Drugs, and Biologicals (14th ed.). Whitehouse Station, NJ, USA: Merck Research Laboratories, Merck & Co., Inc.
- Emsley, John (2001). Nature's Building Blocks: An A–Z Guide to the Elements. Oxford, England, UK: Oxford University Press.
- "Abundance in oceans". Mark Winter,
- "Abundance in stream water". Mark Winter,
- Ober, Joyce A. "Mineral Commodity Summaries 2010: Strontium" (PDF). United States Geological Survey. Retrieved 2010-05-14.
- Kresse, Robert; Baudis, Ulrich; Jäger, Paul; Riechers, H. Hermann; Wagner, Heinz; Winkler, Jocher; Wolf, Hans Uwe (2007). "Barium and Barium Compounds". In Ullman, Franz. Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH.
- "Radium", Los Alamos National Laboratory. Retrieved on 2009-08-05.
- Malley, Marjorie C (2011-08-25). Radioactivity. pp. 115–.
- Kemal, Mevlüt; Arslan, V; Akar, A; Canbazoglu, M (1996). Production of SrCO, by black ash process: Determination of reductive roasting parameters. p. 401.
- Miller, M. M. "Barite". USGS.gov.
- Petzow, G. N.; Aldinger, F.; Jönsson, S.; Welge, P.; Van Kampen, V.; Mensing, T.; Brüning, T. (2005). "Ullmann's Encyclopedia of Industrial Chemistry".
- Diehl, Roland (2000). High-power diode lasers. Springer. p. 104.
- "Purdue engineers create safer, more efficient nuclear fuel, model its performance". Purdue University. 27 September 2005. Retrieved 18 September 2008.
- Davis, Joseph R. (1998). "Beryllium". Metals handbook. ASM International. pp. 690–691.
- Schwartz, Mel M. (2002). Encyclopedia of materials, parts, and finishes. CRC Press. p. 62.
- Baker, Hugh D. R.; Avedesian, Michael (1999). Magnesium and magnesium alloys. Materials Park, OH: Materials Information Society. p. 4.
- Amundsen, K.; Aune, T. K.; Bakke, P.; Eklund, H. R.; Haagensen, J. Ö.; Nicolas, C.; Rosenkilde, C.; Van Den Bremt, S.; Wallevik, O. (2003). "Ullmann's Encyclopedia of Industrial Chemistry".
- Lide, D. R., ed. (2005). CRC Handbook of Chemistry and Physics (86th ed.). Boca Raton (FL): CRC Press.
- Moreno, Teresa; Querol, Xavier; Alastuey, Andrés; Cruz Minguillón, Mari; Pey, Jorge; Rodriguez, Sergio; Vicente Miró, José; Felis, Carles; Gibbons, Wes (2007). "Recreational atmospheric pollution episodes: Inhalable metalliferous particles from firework displays". Atmospheric Environment 41 (5): 913.
- Miledi, R. (1966). "Strontium as a Substitute for Calcium in the Process of Transmitter Release at the Neuromuscular Junction". Nature 212 (5067): 1233–4.
- Hagler D.J., Jr, Goda Y. (2001). "Properties of synchronous and asynchronous release during pulse train depression in cultured hippocampal neurons". J. Neurophysiol. 85 (6): 2324–34.
- Jones, Chris J. and Thornback, John (2007). Medicinal applications of coordination chemistry. Royal Society of Chemistry. p. 102.
- Terrill Jr, JG; Ingraham Sc, 2nd; Moeller, DW (1954). "Radium in the healing arts and in industry: Radiation exposure in the United States". Public health reports 69 (3): 255–62.
- "Mass Media & Environmental Conflict – Radium Girls". Retrieved 2009-08-01.
- Committee On Radiation Source Use And Replacement, National Research Council (U.S.); Nuclear And Radiation Studies Board, National Research Council (U.S.) (January 2008). Radiation source use and replacement: Abbreviated version. p. 24.
- Bentel, Gunilla Carleson (1996). Radiation therapy planning. p. 8.
- Oganessian, Yu. Ts.; Utyonkov, V.; Lobanov, Yu.; Abdullin, F.; Polyakov, A.; Sagaidak, R.; Shirokovsky, I.; Tsyganov, Yu.; Voinov, A. (2009). "Attempt to produce element 120 in the 244Pu+58Fe reaction". Phys. Rev. C 79 (2): 024603.
- Seaborg, G. T. (c. 2006). "transuranium element (chemical element)". Encyclopædia Britannica. Retrieved 16 March 2010.
- Group 2 – Alkaline Earth Metals, Royal Chemistry Society.
- Hogan, C.Michael. 2010. . eds. A.Jorgensen, C. Cleveland. Encyclopedia of EarthCalcium. National Council for Science and the Environment.
- Maguire, Michael E. "Alkaline Earth Metals." Chemistry: Foundations and Applications. Ed. J. J. Lagowski. Vol. 1. New York: Macmillan Reference USA, 2004. 33–34. 4 vols. Gale Virtual Reference Library. Thomson Gale.
- Silberberg, M.S., Chemistry: The molecular nature of Matter and Change (3e édition, McGraw-Hill 2009)
- Petrucci R.H., Harwood W.S. et Herring F.G., General Chemistry (8e édition, Prentice-Hall 2002)
|Periodic table (Large cells)|