Ferrous charcoal was required as fuel.
Steel (with a carbon content between pig iron and wrought iron) was first produced in antiquity, and archaeological evidence of cast iron first appears in 5th century BC China. New methods of producing it by carburizing bars of iron in the cementation process were devised in the 17th century. In the Industrial Revolution, new methods of producing bar iron without charcoal were devised and these were later applied to produce steel. In the late 1850s, Henry Bessemer invented a new steelmaking process, involving blowing air through molten pig iron, to produce mild steel. This and other 19th century and later processes have led to wrought iron no longer being produced.
- Hematitic and meteoric iron 1
- Native iron 2
Iron smelting and the Iron Age 3
Ancient Near East 3.1
- Theories on the origin of iron smelting 3.1.1
- Indian Sub-Continent 3.2
- Iron Age Europe 3.3
- China 3.4
- Indigenous South of the Saharan Africa 3.5
- Medieval Islamic world 3.6
- Ancient Near East 3.1
Medieval and Early Modern Europe 4
- Powered bloomeries 4.1
- Blast furnace 4.2
- Osmond process 4.3
- Finery process 4.4
- Cementation steel 4.5
- Crucible steel 4.6
Transition to coke in England 5
- Beginnings 5.1
- Abraham Darby and his successors 5.2
- New forge processes 5.3
- Hot blast 6
- Industrial steelmaking 7
- See also 8
- Notes 9
- References 10
Hematitic and meteoric iron
Much later, metal was extracted from iron-nickel meteorites, which comprise about 6% of all meteorites that fall on the earth. That source can often be identified with certainty because of the unique crystalline features ("Widmanstatten figures") of that material, which are preserved when the metal is worked cold or at low temperature. Those artifacts include, for example, a bead from the 5th millennium BC found in Iran and spear tips and ornaments from Ancient Egypt and Sumer around 4000 BC. Meteoric iron has been identified also in a Chinese axe head from the middle of the 2nd millennium BC.
These early uses appear to have been largely ceremonial or ornamental. Meteoritic iron is very rare, and the metal was probably very expensive, perhaps more expensive than gold. The early Hittites are known to have bartered iron (meteoritic or smelted) for silver, at a rate of 40 times the iron's weight, with Assyria.
Meteoric iron was also fashioned into tools in the Arctic, beginning around the year 1000, when the Thule people of Greenland began making harpoons, knives, ulos and other edged tools from pieces of the Cape York meteorite. Typically pea-size bits of metal were cold-hammered into disks that were fitted into a bone handle. These artifacts were also used as trade goods with other Arctic peoples: tools made from the Cape York meteorite have been found in archaeological sites more than 1,000 miles (1,600 km) away. When the American polar explorer Robert Peary shipped the largest piece of the meteorite to the American Museum of Natural History in New York City in 1897, it still weighed over 33 tons. Another example of a late use of meteoritic iron is an adze from around 1000 AD found in Sweden.
Because meteorites fall from the sky, some linguists have conjectured that the English word iron (OE īsern), which has cognates in many northern and Western European languages, derives from the Etruscan aisar ("the gods"). Even if this is not the case, the word is likely a loan into pre-Proto-Germanic from Celtic or Italic. Krahe compares Old Irish, Illyrian, Venetic and Messapic forms.
Iron smelting and the Iron Age
Iron smelting—the extraction of usable metal from oxidized iron ores—is more difficult than tin and copper smelting. While these metals and their alloys can be cold-worked or melted in relatively simple furnaces (such as the kilns used for pottery) and cast into molds, smelted iron requires hot-working and can be melted only in specially designed furnaces. Thus it is not surprising that humans only mastered the technology of smelted iron after several millennia of bronze metallurgy.
The place and time for the discovery of iron smelting is not known, partly because of the difficulty of distinguishing metal extracted from nickel-containing ores from hot-worked meteoritic iron. The archaeological evidence seems to point to the Middle East area, during the Bronze Age in the 3rd millennium BC. However iron artifacts remained a rarity until the 12th century BC.
The Iron Age is conventionally defined by the widespread use of steel weapons and tools, alongside or replacing bronze ones. That transition happened at different times in different places, as the technology spread through the Old World. Mesopotamia was fully into the Iron Age by 900 BC. Although Egypt produced iron artifacts, bronze remained dominant there until the conquest by Assyria in 663 BC. The Iron Age started in Central Europe around 500 BC, and in India and China sometime between 1200 and 500 BC. Around 500 BC, Nubia became a major manufacturer and exporter of iron. This was after the Nubians were expelled from Egypt by the Assyrians, who used iron weapons.
Ancient Near East
One of the earliest smelted iron artifacts known is a dagger with an iron blade found in a Hattic tomb in Anatolia, dating from 2500 BC. About 1500 BC, increasing numbers of non-meteoritic, smelted iron objects appear in Mesopotamia, Anatolia, and Egypt. Nineteen iron objects were found in the tomb of Egyptian ruler Tutankhamun, died in 1323 BC, including an iron dagger with a golden hilt, an Eye of Horus, the mummy's head-stand and sixteen models of an artisan's tools. An Ancient Egyptian sword bearing the name of pharaoh Merneptah as well as a battle axe with an iron blade and gold-decorated bronze shaft were both found in the excavation of Ugarit.
Although iron objects from the Sub-Saharan Africa through India. As the technology spread, iron came to replace bronze as the dominant metal used for tools and weapons across the Eastern Mediterranean (the Levant, Cyprus, Greece, Crete, Anatolia, and Egypt).
Iron smelting was originally produced in bloomeries, furnaces where bellows were used to force air through a pile of iron ore and burning charcoal. The carbon monoxide produced by the charcoal reduced the iron oxide from the ore to metallic iron. However, the bloomery was not hot enough to melt the iron, so the metal collected in the bottom of the furnace as a spongy mass, or bloom. Workers filled the bloom's pores with ash and slag. Then they reheated the bloom to soften the iron and melt the slag, and then repeatedly beat and folded it to force out the molten slag. This laborious, time-consuming process produced wrought iron, a malleable but fairly soft alloy.
Concurrent with the transition from bronze to iron was the discovery of carburization, the process of adding carbon to wrought iron. While the iron bloom contained some carbon, the subsequent hot-working oxidized most of it. Smiths in the Middle East discovered that wrought iron could be turned into a much harder product by heating the shaped piece in a bed of charcoal for some time, and then quenching it in water or oil. This procedure turned the outer layers of the piece into steel, an alloy of iron and iron carbides, which was harder and less brittle than the bronze it began to replace.
Theories on the origin of iron smelting
The development of iron smelting was traditionally attributed to the Hittites of Anatolia during the Late Bronze Age. It was believed that they maintained a monopoly on ironworking, and that their empire had been based on that advantage. According to that theory, the ancient Sea Peoples, who invaded the Eastern Mediterranean and destroyed the Hittite empire at the end of the Late Bronze Age, were responsible for spreading the knowledge through that region. This theory is no longer held in the mainstream of scholarship, since there is no archaeological evidence of the alleged Hittite monopoly. While there are some iron objects from Bronze Age Anatolia, the number is comparable to iron objects found in Egypt and other places of the same time period; and only a small number of these objects are weapons.
A more recent theory claims that the development of iron technology was driven by the disruption of the copper and tin trade routes, due to the collapse of the empires at the end of the Late Bronze Age. These metals, especially tin, were not widely available and metal workers had to transport them over long distances, whereas iron ores were widely available. However, no known archaeological evidence suggests a shortage of bronze or tin in the Early Iron Age. Bronze objects remained abundant, and these objects have the same percentage of tin as those from the Late Bronze Age.
The History of metallurgy in the Indian subcontinent begins in the 2nd millennium BC. Archaeological sites in India, such as Malhar, Dadupur, Raja Nala Ka Tila and Lahuradewa in present day Uttar Pradesh have yielded iron implements dated between 1800 – 1200 BC . Some scholars believe that by the early 13th century BC iron smelting was practiced in a large scale in India. In Southern India (present day Mysore) iron appeared as early as 11th to 12th centuries BC. The technology of iron metallurgy advanced during a period of peaceful settlements in the 1st millennium BC. and the politically stable Maurya period.
Iron artifacts such as spikes, knives, daggers, arrow-heads, bowls, spoons, saucepans, axes, chisels, tongs, door fittings etc. ranging from 600 to 200 BC have been discovered from several archaeological sites of India. The Greek historian Herodotus wrote the first western account of the use of iron in India. The Indian mythological texts, the Upanishads, have mentions of weaving, pottery, and metallurgy as well. The Romans had high regard for the chemical excellence of India in the time of the Gupta Empire.
Perhaps as early as 300 BC, although certainly by 200 AD, high quality steel was being produced in southern India also by the crucible technique. In this system, high-purity wrought iron, charcoal, and glass were mixed in a crucible and heated until the iron melted and absorbed the carbon. Iron chain was used in Indian suspension bridges as early as the 4th century.
Wootz steel was produced in India and Sri Lanka from around 300 BC. Wootz steel was famous since Classical Antiquity for its durability and ability to hold an edge. When asked by Alexander to select a gift, King Porus is said to have chosen, instead of gold or silver, thirty pounds of steel. Wootz steel was originally a complex alloy with iron as its main component together with various trace elements. Recent studies have suggested that its qualities may have been due to the formation of carbon nanotubes in the metal. According to Will Durant,the technology passed to the Persians and from them to Arabs who spread it through the Middle East. In the 16th century, the Dutch carried the technology from South India to Europe, where it was mass-produced.
Steel was being produced in Sri Lanka since 300 BC by furnaces blown by the monsoon winds. The furnaces were dug into the crests of hills, and the wind was diverted into the air vents by long trenches. This arrangement created a zone of high pressure at the entrance, and a zone of low pressure at the top of the furnace. The flow is believed to have allowed higher temperatures than bellows-driven furnaces could produce, resulting in better-quality iron. Steel made in Sri Lanka was traded extensively within the region and in the Islamic world.
See also Steel#Wootz steel and Damascus steel
One of the world's foremost metallurgical curiosities is an iron pillar located in the Qutb complex, Delhi. The pillar is made of wrought iron (98% Fe), is almost seven meters high and weighs more than six tonnes. The pillar was erected by Chandragupta II Vikramaditya and has withstood 1,600 years of exposure to heavy rains with relatively little corrosion.
Iron Age Europe
Iron working was introduced to Greece in the late 11th century BC. The earliest marks of Iron Age in Central Europe are artifacts from the Hallstatt C culture (8th century BC). Throughout the 7th to 6th centuries BC, iron artifacts remained luxury items reserved for an elite. This changed dramatically shortly after 500 BC with the rise of the La Tène culture, from which time iron metallurgy also becomes common in Northern Europe and Britain. The spread of ironworking in Central and Western Europe is associated with Celtic expansion. By the 1st century BC, Noric steel was famous for its quality and sought-after by the Roman military.
Historians debate whether bloomery-based ironworking ever spread to China from the Middle East. One theory suggests that metallurgy was introduced through Central Asia. The earliest
- Ebrey, Walthall, Palais, (2006). East Asia: A Cultural, Social, and Political History. Boston: Houghton Mifflin Company.
- Knowles, Anne Kelly. (2013) Mastering Iron: The Struggle to Modernize an American Industry, 1800–1868 (University of Chicago Press) 334 pages
- Needham, Joseph (1986). Science and Civilization in China: Volume 4, Part 2; Needham, Joseph (1986). Science and Civilization in China: Volume 4, Part 3.
- Pleiner, R. (2000) Iron in Archaeology. The European Bloomery Smelters, Praha, Archeologický Ústav Av Cr.
- Wagner, Donald (1996). Iron and Steel in Ancient China. Leiden: E. J. Brill.
- Woods, Michael and Mary B. Woods (2000). Ancient Machines: From Wedges to Waterwheels. Minneapolis: Twenty-First Century Books.
- Rehren T, et al, "5,000 years old Egyptian iron beads made from hammered meteoritic iron", Journal of Archaeological Science 2013 http://www.sciencedirect.com/science/article/pii/S0305440313002057
- E. Photos, 'The Question of Meteoritic versus Smelted Nickel-Rich Iron: Archaeological Evidence and Experimental Results' World Archaeology Vol. 20, No. 3, Archaeometallurgy (February 1989), pp. 403-421. Online version accessed on 2010-02-08.
- Duncan E. Miller and N.J. Van Der Merwe, 'Early Metal Working in South of the Saharan Africa' Journal of African History 35 (1994) 1-36; Minze Stuiver and N.J. Van Der Merwe, 'Radiocarbon Chronology of the Iron Age in South of the Saharan Africa' Current Anthropology 1968.
- Donald B. Wagner (1993). Iron and Steel in Ancient China. BRILL. pp. 335–340.
- Oachs, Mitch; Nathan, Baile (2002). "Paleolithic Egypt". Minnesota State University EMuseum. Minnesota State University. Archived from the original on 2003-09-22. Retrieved 2014-08-10.
- R. F. Tylecote, A History of Metallurgy (2nd edn, 1992), 3
- Klass R Veenhof; Jesper Eidem (2008). Mesopotamia: The Old Assyrian Period: The Old Assyrian Period. Orbis Biblicus et Orientalis. German: Vandenhoeck & Ruprecht GmbH & Co KG. p. 84.
- Benvéniste 1969 cit. dep; Rick Mc Callister and Silvia Mc Callister-Castillo (1999). "Etruscan Glossary". Retrieved 2006-06-19.
- IF 46:184f
- Waldbaum, Jane C. From Bronze to Iron. Göteburg: Paul Astöms Förlag (1978): 56–58.
- Marco Ceccarelli (2000). International Symposium on History of Machines and Mechanisms: Proceedings HMM Symposium. Springer. ISBN 0-7923-6372-8. pp 218
- Collins, Rober O. and Burns, James M. The History of Sub-Saharan Africa. New York:Cambridge University Press, p. 37. ISBN 978-0-521-68708-9.
- Richard Cowen () The Age of Iron Chapter 5 in a series of essay s on Geology, History, and People prepares for a course of the University of California at Davis. Online version accessed on 2010-02-11.
- The Tomb of Tut-Ankh-Amen: Discovered by the Late Earl of Carnarvon and Howard Carter, Volume 3
- Waldbaum 1978: 23.
- Muhly, James D. 'Metalworking/Mining in the Levant' pp. 174-183 in Near Eastern Archaeology ed. Suzanne Richard (2003), pp. 179-180.
- Muhly 2003:180.
- Rakesh Tewari (), The origins of Iron Working in India: New evidence from the Central Ganga plain and the Eastern Vindhyas
- I. M. Drakonoff (1991). Early Antiquity. University of Chicago Press. ISBN 0-226-14465-8. pp 372
- J. F. Richards et al. (2005).The New Cambridge History of India. Cambridge University Press. ISBN 0-521-36424-8. pp 64
- Patrick Olivelle (1998). Upanisads. Oxford University Press. ISBN 0-19-283576-9. pp xxix
- Will Durant (), The Story of Civilization I: Our Oriental Heritage
- G. Juleff (1996). "An ancient wind powered iron smelting technology in Sri Lanka".
- Suspension bridge. (2007). In Encyclopædia Britannica. Retrieved April 5, 2007, from Encyclopædia Britannica Online
- Sanderson, Katharine (2006-11-15). "Sharpest cut from nanotube sword: Carbon nanotech may have given swords of Damascus their edge". Nature. Retrieved 2006-11-17.
- Roy Porter (2003). The Cambridge History of Science. Cambridge University Press. ISBN 0-521-57199-5. pp 684
- Juleff, G. (1996). "An ancient wind powered iron smelting technology in Sri Lanka".
- Simulation of air flows through a Sri Lankan wind driven furnace, submitted to J. Arch. Sci, 2003.
- R. Balasubramaniam (2002), Delhi Iron Pillar: New Insights. Aryan Books International, Delhi ISBN 81-7305-223-9.  
- Riederer, Josef; Wartke, Ralf-B.: "Iron", Cancik, Hubert; Schneider, Helmuth (eds.): Brill's New Pauly, Brill 2009
- Craddock, Paul T. (2008): "Mining and Metallurgy", in: Oleson, John Peter (ed.): The Oxford Handbook of Engineering and Technology in the Classical World, Oxford University Press, ISBN 978-0-19-518731-1, p. 108
- Wagner, Donald B.: "The State and the Iron Industry in Han China", NIAS Publishing, Copenhagen 2001, ISBN 87-87062-77-1, p. 73
- Pigott, Vincent C. (1999). The Archaeometallurgy of the Asian Old World. Philadelphia: University of Pennsylvania Museum of Archaeology and Anthropology. ISBN 0-924171-34-0, p. 8.
- Giannichedda, Enrico (2007): "Metal production in Late Antiquity", in Technology in Transition AD 300-650 L. Lavan E.Zanini & A. Sarantis Brill, eds., Leiden; p. 200
- Needham, Volume 4, Part 3, 197.
- Needham, Volume 4, Part 3, 277.
- Needham, Volume 4, Part 3, 563 g
- Needham, Volume 4, Part 3, 86.
- Needham, Volume 4, Part 1, 282.
- Needham, Volume 4, Part 2, 370
- Needham, Volume 4, Part 2, 371.
- Robert Hartwell, 'Markets, Technology and the Structure of Enterprise in the Development of the Eleventh Century Chinese Iron and Steel Industry' Journal of Economic History 26 (1966). pp. 53-54
- Ebrey, 158.
- Smith, A. H. V. (1997): "Provenance of Coals from Roman Sites in England and Wales", Britannia, Vol. 28, pp. 297–324 (322–324)
- Iron in Africa: Revisiting the History – Unesco (2002)
- Duncan E. Miller and N.J. Van Der Merwe, 'Early Metal Working in Sub Saharan Africa' Journal of African History 35 (1994) 1–36; Minze Stuiver and N.J. Van Der Merwe, 'Radiocarbon Chronology of the Iron Age in Sub-Saharan Africa' Current Anthropology 1968.
- Ehret, Christopher (2002). The Civilizations of Africa. Charlottesville: University of Virginia, pp. 136, 137 ISBN 0-8139-2085-X.
- Duncan E. Miller and N.J. Van Der Merwe, 'Early Metal Working in South of the Saharan Africa' Journal of African History 35 (1994) 1-36; Minze Stuiver and N.J. Van Der Merwe, 'Radiocarbon Chronology of the Iron Age in South of the Saharan Africa' Current Anthropology 1968. Tylecote 1975 (see below)
- A History of Sub-Saharan Africa
- The Nubian Past
- "Africa's Ancient Steelmakers". Time magazine. 1978-09-25. Retrieved 2007-09-21.
- Adam Robert Lucas (2005), "Industrial Milling in the Ancient and Medieval Worlds: A Survey of the Evidence for an Industrial Revolution in Medieval Europe", Technology and Culture 46 (1): 1-30 [10-1 & 27]
- R. L. Miller (October 1988). "Ahmad Y. Al-Hassan and Donald R. Hill, Islamic technology: an illustrated history". Medical History 32 (4): 466–7.
- Donald Routledge Hill (1996), "Engineering", p. 781, in (Rashed & Morelon 1996, pp. 751–95)
- Donald Routledge Hill, "Mechanical Engineering in the Medieval Near East", Scientific American, May 1991, p. 64-69. (cf. Donald Routledge Hill, Mechanical Engineering)
- Adam Lucas (2006), Wind, Water, Work: Ancient and Medieval Milling Technology, p. 65. BRILL, ISBN 90-04-14649-0.
Kochmann, W.; Reibold M., Goldberg R., Hauffe W., Levin A. A., Meyer D. C., Stephan T., Müller H., Belger A., Paufler P. (2004). "Nanowires in ancient Damascus steel". Journal of Alloys and Compounds 372: L15–L19.
Levin, A. A.; Meyer D. C., Reibold M., Kochmann W., Pätzke N., Paufler P. (2005). "Microstructure of a genuine Damascus sabre". Crystal Research and Technology 40 (9): 905–916.
- Reibold, M.; Levin A. A., Kochmann W., Pätzke N., Meyer D. C. (16 November 2006). "Materials:Carbon nanotubes in an ancient Damascus sabre". Nature 444 (7117): 286.
- Legendary Swords' Sharpness, Strength From Nanotubes, Study Says
- Sanderson, Katharine (2006-11-15). "Sharpest cut from nanotube sword: Carbon nanotech may have given swords of Damascus their edge". Nature (journal). Retrieved 2006-11-17.
- A. R. Lucas, 'Industrial milling in the ancient and Medieval Worlds' Technology and Culture 46 (2005), 19.
- R. F. Tylecote, A History of Metallurgy, 76.
- P. W. King, 'The production and consumption of bar iron in early modern England and Wales' Economic History Review 58(1) (2005), 1-33.
- P. W. King, 'Dud Dudley's contribution to metallurgy' Historical Metallurgy 36(1) (2002), 43-53; P. W. King, 'Sir Clement Clerke and the adoption of coal in metallurgy' Trans. Newcomen Soc. 73(1) (2001-2), 33-52.
- A. Raistrick, A dynasty of Ironfounders (1953; 1989); N. Cox, 'Imagination and innovation of an industrial pioneer: The first Abraham Darby' Industrial Archaeology Review 12(2) (1990), 127-144.
- A. Raistrick, Dynasty; C. K. Hyde, Technological change and the British iron industry 1700–1870 (Princeton, 1977), 37-41; P. W. King, 'The Iron Trade in England and Wales 1500–1815' (Ph.D. thesis, Wolverhampton University, 2003), 128-41.
- G. R. Morton and N. Mutton, 'The transition to Cort's puddling process' Journal of Iron and Steel Institute 205(7) (1967), 722-8; R. A. Mott (ed. P. Singer), Henry Cort: The great finer: creator of puddled iron (1983); P. W. King, 'Iron Trade', 185-93.
- A. Birch, Economic History of the British Iron and Steel Industry , 181-9; C. K. Hyde, Technological Change and the British iron industry (Princeton 1977), 146-59.
- Damascus Steel
- History of steelmaking
- Iron Age
- Nok culture
- Non-ferrous extractive metallurgy
- Roman metallurgy
Until these 19th-century developments, steel was an expensive commodity and only used for a limited number of purposes where a particularly hard or flexible metal was needed, as in the cutting edges of tools and springs. The widespread availability of inexpensive steel powered the Second Industrial Revolution and modern society as we know it. Mild steel ultimately replaced wrought iron for almost all purposes, and wrought iron is no longer commercially produced. With minor exceptions, alloy steels only began to be made in the late 19th century. Stainless steel was developed on the eve of the First World War and was not widely used until the 1920s.
Finally, the basic oxygen process was introduced at the Voest-Alpine works in 1952; a modification of the basic Bessemer process, it lances oxygen from above the steel (instead of bubbling air from below), reducing the amount of nitrogen uptake into the steel. The basic oxygen process is used in all modern steelworks; the last Bessemer converter in the U.S. was retired in 1968. Furthermore, the last three decades have seen a massive increase in the mini-mill business, where scrap steel only is melted with an electric arc furnace. These mills only produced bar products at first, but have since expanded into flat and heavy products, once the exclusive domain of the integrated steelworks.
The problem of mass-producing cheap steel was solved in 1855 by Henry Bessemer, with the introduction of the Bessemer converter at his steelworks in Sheffield, England. (An early converter can still be seen at the city's Kelham Island Museum). In the Bessemer process, molten pig iron from the blast furnace was charged into a large crucible, and then air was blown through the molten iron from below, igniting the dissolved carbon from the coke. As the carbon burned off, the melting point of the mixture increased, but the heat from the burning carbon provided the extra energy needed to keep the mixture molten. After the carbon content in the melt had dropped to the desired level, the air draft was cut off: a typical Bessemer converter could convert a 25-ton batch of pig iron to steel in half an hour.
Apart from some production of puddled steel, English steel continued to be made by the cementation process, sometimes followed by remelting to produce crucible steel. These were batch-based processes whose raw material was bar iron, particularly Swedish oregrounds iron.
The efficiency of the blast furnace was improved by the change to hot blast, patented by James Beaumont Neilson in Scotland in 1828. This further reduced production costs. Within a few decades, the practice was to have a 'stove' as large as the furnace next to it into which the waste gas (containing CO) from the furnace was directed and burnt. The resultant heat was used to preheat the air blown into the furnace.
In the early 19th century, Hall discovered that the addition of iron oxide to the charge of the puddling furnace caused a violent reaction, in which the pig iron was decarburised, this became known as 'wet puddling'. It was also found possible to produce steel by stopping the puddling process before decarburisation was complete.
It was only after this that economically viable means of converting pig iron to bar iron began to be devised. A process known as potting and stamping was devised in the 1760s and improved in the 1770s, and seems to have been widely adopted in the West Midlands from about 1785. However, this was largely replaced by Henry Cort's puddling process, patented in 1784, but probably only made to work with grey pig iron in about 1790. These processes permitted the great expansion in the production of iron that constitutes the Industrial Revolution for the iron industry.
New forge processes
bar iron. The reason for the delay remains controversial.
In 1707, Abraham Darby patented a method of making cast iron pots. His pots were thinner and hence cheaper than those of his rivals. Needing a larger supply of pig iron he leased the blast furnace at Coalbrookdale in 1709. There, he made iron using coke, thus establishing the first successful business in Europe to do so. His products were all of cast iron, though his immediate successors attempted (with little commercial success) to fine this to bar iron.
Abraham Darby and his successors
Smelting with coal (or its derivative coke) was a long sought objective. The production of pig iron with coke was probably achieved by Dud Dudley in the 1620s, and with a mixed fuel made from coal and wood again in the 1670s. However this was probably only a technological rather than a commercial success. Shadrach Fox may have smelted iron with coke at Coalbrookdale in Shropshire in the 1690s, but only to make cannonballs and other cast iron products such as shells. However, in the peace after the Nine Years War, there was no demand for these.
Early iron smelting used charcoal as both the heat source and the reducing agent. By the 18th century, the availability of wood for making charcoal was limiting the expansion of iron production, so that England became increasingly dependent for a considerable part of the iron required by its industry, on Sweden (from the mid-17th century) and then from about 1725 also on Russia.
Transition to coke in England
In the 1740s, Benjamin Huntsman found a means of melting blister steel, made by the cementation process, in crucibles. The resulting crucible steel, usually cast in ingots, was more homogeneous than blister steel.
In the early 17th century, ironworkers in Western Europe had developed the cementation process for carburizing wrought iron. Wrought iron bars and charcoal were packed into stone boxes, then held at a red heat for up to a week. During this time, carbon diffused into the iron, producing a product called cement steel or blister steel. One of the earliest places where this was used in England was at Coalbrookdale, where Sir Basil Brooke had two cementation furnaces (recently excavated). For a time in the 1610s, he owned a patent on the process, but had to surrender this in 1619. He probably used Forest of Dean iron as his raw material, but it was soon found that oregrounds iron was more suitable. The quality of the steel could be improved by faggoting, producing the so-called shear steel.
An alternative method of decarburising pig iron was the finery process, which seems to have been devised in the region around Namur in the 15th century. By the end of that century, this Walloon process spread to the Pay de Bray on the eastern boundary of Normandy, and then to England, where it became the main method of making wrought iron by 1600. It was introduced to Sweden by Louis de Geer in the early 17th century and was used to make the oregrounds iron favoured by English steelmakers.
Iron from furnaces such as Lapphyttan was refined into wrought iron by the osmond process. The pig iron from the furnace was melted in front of a blast of air and the droplets caught on a staff (which was spun). This formed a ball of iron, known as an osmond. This was probably a traded commodity by c. 1200.
Cast iron development lagged in Europe, as the smelters could only achieve temperatures of about 1000 C; or perhaps they did not want hotter temperatures, as they were seeking to produce blooms as a precursor of wrought iron, not cast iron. Through a good portion of the Middle Ages, in Western Europe, iron was thus still being made by the working of iron blooms into wrought iron. Some of the earliest casting of iron in Europe occurred in Sweden, in two sites, Lapphyttan and Vinarhyttan, between 1150 and 1350. Some scholars have speculated the practice followed the Mongols across Russia to these sites, but there is no clear proof of this hypothesis, and it would certainly not explain the pre-Mongol datings of many of these iron-production centres. In any event, by the late 14th century, a market for cast iron goods began to form, as a demand developed for cast iron cannonballs.
Sometime in the medieval period, water power was applied to the bloomery process. It is possible that this was at the Bishop of Durham, near Bedburn in 1408, but that was certainly not the first such ironworks. In the Furness district of England, powered bloomeries were in use into the beginning of the 18th century, and near Garstang until about 1770.
There was no fundamental change in the technology of iron production in Europe for many centuries. European metal workers continued to produce iron in bloomeries. However, the Medieval period brought two developments—the use of water power in the bloomery process in various places (outlined above), and the first European production in cast iron.
Medieval and Early Modern Europe
 One of the most famous steels produced in the medieval Near East was
hydropowered water mill rather than manual labour was invented in the 12th century Islamic Spain.
Iron technology was further advanced by several Muslim world had these industrial mills in operation, from Islamic Spain and North Africa in the west to the Middle East and Central Asia in the east. There are also 10th-century references to cast iron, as well as archeological evidence of blast furnaces being used in the Ayyubid and Mamluk empires from the 11th century, thus suggesting a diffusion of Chinese metal technology to the Islamic world.
Medieval Islamic world
In the regions of Tanzania inhabited by the Haya people, carbon dating in the 1970s showed that blast furnaces were as old as 2000 years, whereas steel of this calibre did not appear in Europe until several centuries later.
Similarly, smelting in bloomery-type furnaces in Nok culture in Africa by 500 BC. The earliest records of bloomery-type furnaces in East Africa are discoveries of smelted iron and carbon in Nubia and Axum that date back between 1,000-500 BCE. Particularly in Meroe, there are known to have been ancient bloomeries that produced metal tools for the Nubians and Kushites and produced surplus for their economy.
In the region of the Aïr Mountains in Niger there are signs of independent copper smelting between 2500–1500 BC. The process was not in a developed state, indicating smelting was not foreign. It became mature about the 1500 BC.
Inhabitants at Termit, in eastern Niger became the first iron smelting people in West Africa around 1500 BC. Iron and copper working then continued to spread southward through the continent, reaching the Cape around AD 200. The widespread use of iron revolutionized the Bantu-speaking farming communities who adopted it, driving out and absorbing the rock tool using hunter-gatherer societies they encountered as they expanded to farm wider areas of savanna. The technologically superior Bantu-speakers spread across southern Africa and became wealthy and powerful, producing iron for tools and weapons in large, industrial quantities.
Indigenous South of the Saharan Africa
 at the time.Rhineland by the 2nd century AD, although it was also practised in the continental Roman Britain was pioneered in coal This switch in resources from charcoal to  to replace the use of charcoal, and with this switch in resources many acres of prime timberland in China were spared.bituminous coke However, by this time the Chinese had figured out how to use  By the 11th century, there was also a large amount of deforestation in China due to the iron industry's demands for charcoal. During the
Cast iron is rather brittle and unsuitable for striking implements. It can, however, be decarburized to steel or wrought iron by heating it in air for several days. In China, these ironworking methods spread northward, and by 300 BC, iron was the material of choice throughout China for most tools and weapons. A mass grave in Hebei province, dated to the early 3rd century BC, contains several soldiers buried with their weapons and other equipment. The artifacts recovered from this grave are variously made of wrought iron, cast iron, malleabilized cast iron, and quench-hardened steel, with only a few, probably ornamental, bronze weapons.